Hose Retention System for Workshop & Mobile Application
The POP-LOCK Workshop hose retention system meets the requirements of various standards and regulations for protecting against hazards caused by hose whipping in case of failure. Available in three sizes covering all common nominal diameters and different lengths, the system is easy to install, easily recognisable by colour differences, and can be fitted without disassembling the existing hose assembly using standard tools.
| Part Number | Cable Diameter | Length | Suits Hose Size |
|---|---|---|---|
| POP-LOCK KIT Ø3-500 | Ø3 mm | 500 mm | DN5–16 |
| POP-LOCK KIT Ø4-750 | Ø4 mm | 750 mm | DN20–32 |
| POP-LOCK KIT Ø5-1000 | Ø5 mm | 1000 mm | DN40–50 |
Stainless steel construction
UV resistant
Oil and dirt resistant
Secured against slipping by a blind rivet
Can be installed without disassembling the existing hose assembly
Available in three sizes to cover all common nominal diameters
| 6 Wire 1 Piece Fitting | 3" |
|---|---|
| 6 Wire 2 Piece Fitting | 2 1/2, 3" |
| Industrial Hose | 4", 6" |